Whirlpool Europe
Custom er Services
S E R V I C E
AVM 215 BL
Service-Manual
Microwave oven
AVM 215 BL
Model
Version
AVM 215 BL
8538 215 12491
Introduction safety
Technical data
Text/Legend
Page
2
3
4
Spare part list
Exploded view
Circuit diagram
Wiring diagram
9
10
11
12
This documentation is only intended for qualified technicians who are aware of the respec-
tive safety regulations.
Date: 10.05.1995
Subject to modification
Document-No.: 4812 714 10519
Whirlpool Europe
Custom er Service
10.05.1995 / Page 3
Doc. No: 4812 714 10519
S E R V I C E
Technical data
Dim ensions of cabinet
Power
Height
Width
Depth
330
553
477
mm
mm
mm
Output power
Microwave frequency
950 +/- 60 W
2450
1200
90
MHz
Grill
Dim ensions of cavity
Quarzgrill
W
Height
Width
Depth
Cavity volume
Turntable diameter
227
372
395
34
mm
mm
mm
l
Tim er
360
mm
Digital
min
Weight
Accessories
Net
Packed
23
26
Kg
Kg
Grill grid, Spacer, Crisp plate
Electrical
Voltage
220-240 V
Frequency
Power consumption
Power consump. CH/DK 2300
Power consump.
Power consump.CH/DK
Fuse
50
2850
Hz
W
W
A
12,6
10
Eu 16 A
10
UK 13 A
A
Fuse CH/DK
A
10.05.1995 / Page 4
Doc. No: 4812 714 10519
Whirlpool Europe
Custom er Service
S E R V I C E
Text/ Legend
Functional Description
Control panel layout
Whirlpool Europe
Custom er Service
10.05.1995 / Page 5
Doc. No: 4812 714 10519
S E R V I C E
Display sym bols description
a) "AUTO" is lit when auto defrost, auto reheat, beverage or auto crisp is selected.
b) "CODE", together with a number, is lit when auto crisp reheat or auto crisp cook is selected. The number
indicates food class.
c) "SENSE" is displayed when an auto function is started.
d) Personal preference for the auto functions is indicated by "--", "-","+", "++". When no personal preference is
choosen, all are turned off.
e) The defrost symbol is lit during manual or auto defrost.
f) The reheat symbol is lit when Auto Reheat or Auto Crisp Reheat is selected.
g) The cook symbol is lit when Auto Crisp Cook is selected.
h) The grill symbol is lit when a function using the grill element is selected. The lower part of the symbol
blinks during cooking.
i) The MW symbols are lit when a function using microwaves is selected.
j) The defrost grid symbol is lit when Auto Defrost is selected, indicating that the defrost grid must be used.
k) The pan symbol is lit when a crisp function is selected, indicating that the crisp pan must be used.
l) The plate symbol is lit when a cooking function is selected, indicating that the turn table must be used.
m)The stage indicators are lit during stage cooking.
n The timer symbol is lit when the independent timer is displayed. It blinks when the timer operates in the
background.
o) The process/power bar indicates how far the process has advanced when using the auto functions.
1000W MW is indicated by a rolling bar.
Calibration
Before the oven can be operated, a calibration must be performed. To start a calibration, make sure that
a cross and a glass turn-table are mounted in the oven. A weight of 200 g must be placed on the centre
of the turn-table. Enter test mode and press START. The cavity light will go on, the turn-table will start
rotating and "CAL" will be displayed. After approximately 30 seconds a number will be displayed. This is
the calibration factor. Check that the number is within specified limits. Press START to store the factor. If
STORE is displayed, the factor has been stored successfully. Otherwise "ERR 8" will be displayed
Calibration factors should be between 170 - 194.
Real tim e clock
Time is set by pressing the CLOCK button. Set the hours with the timer knob. Press the CLOCK button
again and set the minutes with the timer knob. Finally, press the CLOCK button again to clear the sec-
onds and start the clock.
Cooking tim e
The cooking time is set with the timer knob. The maximum cooking time that can be set is 99 minutes.
Microwave power
To adjust the microwave power, press the POWER button. The current power level is displayed in Watts
for 2 seconds. The power level is stepped with the POWER button, while the power level is displayed. If
POWER is pressed when the oven is in stand by, the power level is set to 750 W. The oven is started
with the START button.
10.05.1995 / Page 6
Doc. No: 4812 714 10519
Whirlpool Europe
Custom er Service
S E R V I C E
J ET
If the oven is in stand by and the START button is pressed, cooking is started immediately at full power.
If the oven is already cooking, the timer is incremented 30 seconds each time the button is pressed, but
the power setting is not affected.
Auto Defrost
Press the AUTO DEFROST button. Adjust doneness during the first 20 seconds with the timer knob.
After a while the display shows the estimated defrost time, which is decreased during operation. The
process bar indicates how far the process has advanced.
Auto Reheat
Press the AUTO REHEAT button. Adjust doneness during the first 20 seconds with the timer knob. After
a while the display shows the estimated reheat time, which is decreased during operation. The process
bar indicates how far the process has advanced.
Beverage
Press the BEVERAGE button. Adjust doneness during the first 20 seconds with the timer knob. After a
while the display shows the estimated reheat time, which is decreased during operation. The process
bar indicates how far the process has advanced.
Auto Crisp Reheat
Press the AUTO CRISP REHEAT button. Select food class by repeatedly pressing this button. Adjust
doneness with the timer knob. Start by pressing the START button After a while the display shows the
estimated reheat time, which is decreased during operation. The process bar indicates how far the proc-
ess has advanced.
1 - Auto Crisp Reheat Potato Products
2 - Auto Crisp Reheat Pizza
3 - Auto Crisp Reheat Pie/Quiche
4 - Auto Crisp Reheat Chicken Parts
5 - Auto Crisp Reheat Refresh Bread
Auto Crisp Cook
Press the AUTO CRISP COOK button. Select food class by repeatedly pressing this button. Adjust done-
ness with the timer knob. Start by pressing the START button After a while the display shows the esti-
mated reheat time, which is decreased during operation. The process bar indicates how far the process
has advanced.
1 - Auto Crisp Cook Pizza
2 - Auto Crisp Cook Chicken Parts
Crisp
Select crisp by pressing the CRISP button. Set the cooking time with timer knob and start with the
START button.
Whirlpool Europe
Custom er Service
10.05.1995 / Page 7
Doc. No: 4812 714 10519
S E R V I C E
Grill
Use the GRILL button to select grill operation. Set the cooking time with timer knob and start with the
START button.
NOTE: - When the Crisp or Grill function is selected, grill indicator 1 is lit. When cooking is started, grill
indicator 2 blinks.
Tim er
The TIMER button starts the independent timer. The timer is initiated to 5 s, the timer symbol is dis-
played (not blinking). Display of the timer is toggled with the same button. (If the timer has been started
there is a display time out of 3 s). The timer is set with the timer knob and started with the START but-
ton. 3 seconds after the timer has been started, the function that was already activated is displayed, and
the timer symbol blinks. If the oven is in stand-by, the timer display continues (without blink). The possi-
ble time that can be set ranges from 5 s to 9 hours and 59 minutes. Eight fast beeps indicates that the
timer has counted down to zero. If the timer has been started, it can be turned off by turning the time to
zero, or by pressing the STOP button when the timer is displayed.
Stage
Two stages m ay be stored. The follow ing functions are excluded:
- the Independent Timer
- Auto Defrost
- Auto Reheat
- Beverage
- Auto Defrost-Reheat
- Auto Crisp Reheat
- Auto Crisp Cook
Stage is used according to the follow ing (starting from stand by):
a) Press STAGE. The "1" symbol is displayed. Initiate MW 750W, 5s.
b) Select function (if other than MW), power, time etc. for stage 1. (Grill selects grill mode, not combina-
tion)
c) Press STAGE. The setting above is stored in stage 1. The "2" symbol is displayed. Initiate MW 750W,
0s (shows clearly that a new stage is displayed).
d) Select function etc. for stage 2.
e) Press STAGE. Stage 2 is stored, and stage 1 is displayed. The "1" symbol is displayed. START may be
pressed directly instead.
Mem ories
Program m ing:
Select function, time, power etc. to be stored. Then press a memory button (2 s) until storage is con-
firmed by a beep. The timer may be stored if it has not been started and no other function is active in the
background (stand-by).
10.05.1995 / Page 8
Doc. No: 4812 714 10519
Whirlpool Europe
Custom er Service
S E R V I C E
Fetch from m em ory:
Press the desired memory button, and release it within 2 s. (If the oven is in stand by, the memory con-
tents are displayed immediately when the button is pressed).
When the oven is in operation the memories are not available.
There are no limitations when storing auto functions.
Add a little bit m ore
The aim of this function is to "add a little bit more" at the end of, or after, a cooking session. Every time a
new cooking sessions started, the time for the process is being measured. (Changing between MW,
combination and grill does not reset this timer). A certain part of the measured time is added to the
remaining running time when ADD is pressed. The "Add" time is kept for 1 minute after the oven has
entered stand by. If ADD is pressed within this time, the "add" time and the function and power that was
last used is recalled. (For the auto functions, the corresponding manual function is used.). The minimum
add time is always 5 seconds, except for crisp, where it is 30 seconds (due to heating of the crisp plate).
Stop
The STOP button aborts any operation started, and returns the oven to stand-by.
Whirlpool Europe
Custom er Service
10.05.1995 / Page 9
Doc. No: 4812 714 10519
S E R V I C E
Spare part list
Model
Service No.
Version
AVM 215 BL
853821512491
853821512491
Pos. No. 12NC Code
Description
Pos. No. 12NC Code
Description
002 0
002 2
002 2
013 0
041 0
4819 442 38007 Cabinet BL
421 0
426 0
442 0
442 1
442 2
4819 121 18162 Filter,mains
4819 218 38039 Diode HV
4819 361 18361 Motor Blower
4819 462 58145 Cover fan
4819 462 58146 Container fan
4819 462 79721 Cover upper
4819 462 79722 Cover lower
4819 462 79423 Foot
4819 417 19384 Hinge upper
041 1
100 0
110 0
120 0
121 0
4819 417 19379 Hinge,lower
4819 442 38245 Door cpl. BL
4819 498 69967 Grip WH
4819 442 38004 Door,inner
4819 459 48662 Frame,breaker inner
442 3
443 0
452 0
452 1
452 2
4819 466 98922 Casing
4819 515 28224 Fan wheel
4819 259 98385 Heating element quarz
4819 404 78841 Holder quarz tube
4819 458 58522 Reflector quartz tube
130 0
130 1
131 0
141 0
143 0
4819 276 38338 Unit,pushbutton
4819 466 89172 Clip
4819 535 98529 Door latch
4819 450 69884 Oven glass BL
4819 459 48664 Frame,breaker BL
452 3
452 4
452 5
452 6
485 0
4819 418 79082 Cover bar
4819 532 58263 Washer
4819 532 58262 Washer ceramic
4819 458 58527 Air guide grill
4819 321 18253 Cable,HT
234 0
244 0
244 1
245 0
246 0
4819 325 18056 Plate,protect.
4819 466 98789 Stand plastic
4819 458 58562 Grid defrost
4819 458 19981 Grid
490 0
502 0
502 1
502 2
502 3
4819 321 18231 Cable,mains cpl. with clamp
4819 214 78481 Control unit
4819 209 88046 Microprocessor
4819 113 88001 Resistor 100 Ohm
4819 101 48142 Potentiometer
4819 418 38353 Crisp plate
246 1
255 0
264 0
264 1
301 0
4819 498 69875 Grip crispplate
4819 466 78348 Turntable glass
4819 520 18029 Ring,set
4819 462 38767 Rail
4819 462 38751 Frame pushbuttons
502 4
561 0
562 0
564 0
615 0
4819 130 98002 Coupler,photo not shown
4819 282 48247 Thermostat magnetron 145 C
4819 282 48277 Thermostat 160C
4819 282 48275 Thermostat 165C
4819 280 68319 Relay
301 1
305 0
320 0
332 0
334 0
4819 276 38329 Unit,pushbutton BL
4819 404 78937 Holder
4819 453 49998 Control panel BL
617 0
622 0
622 1
633 0
651 0
4819 280 68323 Relay 24V
4819 276 18273 Switch
4819 276 58011
Switch 5-switch assy
4819 413 98011
Button,push
4819 271 38145 Microswitch
4819 134 28029 Lamp cavity
4819 412 58412 Knob BL
334 1
352 0
352 1
355 0
404 0
4819 413 38126 Clip Knob inner
4819 130 38076 Display
4819 450 69808 Pane for Display
4819 280 18019 Buzzer
691 0
692 0
693 0
693 1
693 2
4819 210 78076 Sensor
4819 210 78078 Sensor humi
4819 210 78077 Sensor weight electronics
4819 466 89228 Plate
4819 131 58019 Magnetron
4819 462 58153 Rail
404 1
404 2
406 0
406 2
411 0
4819 462 38742 Air guide magnetron
4819 325 18055 Plate,protect.
4819 361 18381 Motor
4819 532 68686 Gasket ring
4819 148 68081 Transformer
693 3
693 4
743 0
910 0
912 0
4819 410 28735 Button,push
4819 360 48018 Membrane
4819 462 38749 Air guide
4819 502 18371 Screw
4812 502 18374 Screw not shown
412 0
412 1
420 0
420 1
420 2
4819 145 78168 Transformer HT
4819 462 48431 Damper
4819 121 48016 Capacitor HT
4819 404 78839 Bracket capacitor
4819 492 68558 Clip,fix
912 1
912 2
915 0
971 0
972 0
4819 502 18376 Screw not shown
4819 502 18377 Screw not shown
4819 505 18248 Nut
4819 253 38019 Fuse T8 A
4819 253 38006 Fuse T100mA
10.05.1995 / Page 10
Doc. No: 4812 714 10519
Whirlpool Europe
Custom er Service
S E R V I C E
Exploded view
Whirlpool Europe
Custom er Service
10.05.1995 / Page 11
Doc. No: 4812 714 10519
S E R V I C E
Circuit diagram
|