Woodstock Cordless Drill D3206 User Manual

D3206  
Drill Guide Kit  
Made with the highest quality materials and manufactured to  
exacting specifications for top performance.  
CAUTION  
• Secure workpiece with clamps or vise before drilling.  
always wear aNSI approved safety glasses when drilling.  
INFORMATION  
for drilling spheres, center the concave recess under the drill  
guide on the sphere.  
for drilling cylinders and corner edges, use the V-groove under the  
drill guide.  
• To drill the center line of an edge, slide two small nails into the  
holes the drill guide. Straddle the edge with the nails and twist the  
drill guide so the nails are stopped on the front and back face of  
the workpiece.  
INSTRUCTIONS  
1. Locate and mark the center of the hole to be drilled with an awl or  
center punch.  
2. Insert the 316" bushing into the drill guide and insert the  
Centerpunch/Locator into the bushing.  
3. Place the drill guide over the workpiece and center the Locator  
over the center mark.  
3
4. Without moving the drill guide, remove the Locator and 16"  
bushing from the drill guide.  
5. Insert the desired size drill bushing with the large end up into the  
drill guide.  
6. Insert the appropriate size drill bit into the drill bushing and drill the  
hole.  
Wear aNSI approved safety glasses  
STEELEX PLUS® IS a rEgISTErEd TradEMark of  
Visit our website: shopfox.biz  
360-734-3482  
FAX: 360-671-3053  
D3206  
drILL gUIdE kIT  
Manufactured in Taiwan  
for Woodstock International, Inc.  
 

Whirlpool Cooktop AKT 759 User Manual
Whirlpool Range W10526974A User Manual
White Iron SI 85 User Manual
Woodstock Paint Sprayer W1796 User Manual
WTB Automobile Parts FLOAT100RLC User Manual
Xerox Printer 100 120 144 MX User Manual
Xerox Printer Phaser 6300 6350 User Manual
Yamaha Car Amplifier DSP AX563 User Manual
Yamaha Motorcycle FZS10V User Manual
Zanussi Washer ZWF 1111 W User Manual