Model D4028/D4032
8" & 12" Digital Scale
Instruction Sheet
Introduction
Mount the Model D4028/D4032 on woodworking and
A
metalworking machinery for precise relative distance
measurements between fixed and moving parts, such as
table height, cutter height, tool depth and more.
Specifications
B
Maximum Measuring Distance (D4028) ..... 81⁄2" (216mm)
Maximum Measuring Distance (D4032) ..... 123⁄4" (324mm
Resolution............................................... 0.01mm
Maximum Measuring Speed..................... 1500mm/sec
Battery................... One 1.5V AG13 (LR44) Button Cell
Data Port ................................... 2-Conductor Serial
L
K
C
J
D
I
Identification
Refer to Figure 1 and the following descriptions to better
understand the components of the digital scale.
E
H
A. Upper Mounting Bracket: Secures the scale body to
a fixed machine part with 3⁄8" screws (not included).
B. OFF Button: Turns unit OFF.
G
C. Data Port: Allows a connection to an exterior
device.
F
D. ON/Zero Button: Turns unit ON and zeros the display
when held.
Figure 1. Identification (Model D4028
E. Battery Compartment Cover: Slides to the right for
access to the battery.
shown).
F. Display Mounting Bracket: Installs on the back
of the display unit with the two included M3-.5 x
6 Phillips head screws, and mounts to a movable
machine part with 3⁄8" fasteners.
G. Lower Mounting Bracket: Works with the upper
mounting bracket to secure the scale body.
H. Scale: Shows the relative distance the display unit
moves in inches (0.10" resolution) and millimeters.
I. Decreasing Button: When held,
decreases the displayed number for
precise adjustments.
J. Increasing Button: Increases the dis-
played number when held.
K. Inch/mm Button: Toggles the display
between inches and millimeters.
L. Digital Display: Displays the current
measurement.
COPYRIGHT © OCTOBER, 2010 BY WOODSTOCK INTERNATIONAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT
THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC.
#13363TS
Printed in China
|