ZQ110
OPOS Driver
Installation Guide
P1069380-001
Rev. A
ZQ110
■ Proprietary Statements
This manual contains proprietary information for Zebra Technologies Corporation. It is
intended solely for the information and use of parties operating and maintaining the equip-
ment described herein. Such proprietary information may not be used, reproduced, or dis-
closed to any other parties for any other purpose without the expressed written permission
of Zebra Technologies Corporation.
Product Improvements
Since continuous product improvement is a policy of Zebra Technologies Corporation, all
specifications and signs are subject to change without notice.
FCC Compliance Statement
NOTE: This equipment has been tested and found to comply with the limits of a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equip-
ment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference with radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet or circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
WARNING: Exposure to Radio Frequency radiation. To conform to FCC RF exposure re-
quirements this device shall be used in accordance with the operating conditions and in-
structions listed in this manual.
NOTE: This unit was tested with shielded cables on the peripheral devices. Shielded
cables must be used with the unit to ensure compliance.
Changes or modifications to this unit not expressly approved by Zebra Technologies
Corporation could void the user’s authority to operate this equipment.
OPOS Driver Installation Guide
Rev. 1.00
- 3 -
ZQ110
Canadian Compliance Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme á la norme NMB-003 du Canada.
“IC:” before the equipment certification number signifies that the Industry Canada technical
specifications were met. It does not guarantee that the certified product will operate to the
user’s satisfaction.
Liability Disclaimer
Inasmuch as every effort has been made to supply accurate information in this manual,
Zebra Technologies Corporation is not liable for any erroneous information or omissions.
Zebra Technologies Corporation reserves the right to correct any such errors and
disclaims liability resulting therefrom.
No Liability for Consequential Damage
In no event shall Zebra Technologies Corporation or anyone else involved in the creation,
production, or delivery of the accompanying product (including hardware and software) be
liable for any damages whatsoever (including, without limitation, damages for loss of
business profits, business interruption, loss of business information, or other pecuniary
loss) arising out of the use of or the results of use of or inability to use such product, even
if Zebra Technologies Corporation has been advised of the possibility of such damages.
Because some states do not allow the exclusion of liability for consequential or incidental
damages, the above limitation may not apply to you.
OPOS Driver Installation Guide
Rev. 1.00
- 4 -
ZQ110
Copyrights
The copyrights in this manual and the label print engine described therein are owned by
Zebra Technologies Corporation. Unauthorized reproduction of this manual or the software
in the label print engine may result in imprisonment of up to one year and fines of up to
$10,000 (17 U.S.C.506). Copyright violators may be subject to civil liability.
This product may contain ZPL® , ZPL II® , and ZebraLink™ programs; Element Energy
Equalizer® Circuit; E3® ; and AGFA fonts. Software © ZIH Corp. All rights reserved
worldwide.
ZebraLink and all product names and numbers are trademarks, and Zebra, the Zebra logo,
ZPL, ZPL II, Element Energy Equalizer Circuit, and E3 Circuit are registered trademarks of
ZIH Corp. All rights reserved worldwide.
Monotype® , Intellifont® and UFST® are trademarks of Monotype Imaging, Inc. registered
in the United States Patent and Trademark Office and may be registered in certain
jurisdictions.
Andy™, CG Palacio™, CG Century Schoolbook™, CG Triumvirate™, CG Times™,
Monotype Kai™, Monotype Mincho™ and Monotype Sung™ are trademarks of Monotype
Imaging, Inc. and may be registered in some jurisdictions.
HY Gothic Hangul™ is a trademark of Hanyang Systems, Inc.
Angsana™ is a trademark of Unity Progress Company (UPC) Limited.
Andale® , Arial® , Book Antiqua® , Corsiva® , Gill Sans® , Sorts® and Times New Roman®
are trademarks of The Monotype Corporation registered in the United States Patent and
Trademark Office and may be registered in certain jurisdictions.
Century Gothic™, Bookman Old Style™ and Century Schoolbook™ are trademarks of The
Monotype Corporation and may be registered in certain jurisdictions.
HGPGothicB™ is a trademark of the Ricoh company, Ltd. and may be registered in some
jurisdictions.
Univers™ is a trademark of Heidelberger Druckmaschinen AG, which may be registered in
certain jurisdictions, exclusively licensed through Linotype Library GmbH, a wholly owned
subsidiary of Heidelberger Druckmaschinen AG.
Futura® is a trademark of Bauer Types SA registered in the United States Patent and
Trademark Office and may be registered in some jurisdictions.
TrueType® is a trademark of Apple Computer, Inc. registered in the United States Patent
and Trademark Office and may be registered in certain jurisdictions.
All other product names are the property of their respective owners.
All other brand names, product names, or trademarks belong to their respective holders.
© 2014 ZIH Corp.
OPOS Driver Installation Guide
Rev. 1.00
- 5 -
ZQ110
1. Manual Information
The OPOS Driver Installation Guide describes how to use the OPOS Driver program to
install, setup, and create applications using the OPOS Driver.
Throughout this manual, “OLE for Retail POS” is called “OPOS” and “Unified for Retail
POS” is called “UPOS”.
OPOS Driver Installation Guide
Rev. 1.00
- 6 -
ZQ110
2. Development Precondition
2-1 Features
Through these standardized API functions, you can develop powerful, open POS systems
easily.
2-2 Operating Environment
The table below identifies the supported operating environment for the ZQ110.
IBM PC/AT or Compatible
Windows XP / Windows 2003
Windows XP Embedded / Windows Vista
Windows 7 / Windows 8
Hardware
Operating System
Recommend 10M bytes free
Recommend 32M bytes over
Hdd
Memory
Windows XP / Windows 2003
Windows XP Embedded / Windows Vista
Windows 7 / Windows 8
USB ports
Microsoft Visual Basic Version 6.0
Microsoft Visual C++ Version 6.0
Power Builder / Delphi / etc.
Supported Languages
2-3 Accessible Devices
Model
ZQ110
Serial
Not
supported supported
PARALLEL
USB
Bluetooth Ethernet WirelessLAN
Supported
Not
Supported Supported Supported
OPOS Driver Installation Guide
Rev. 1.00
- 7 -
ZQ110
3. Installation
3-1 Installation
1. Run the setup file: Zebra ZQ110 OPOS Driver Installer
The Welcome dialog displays.
2. Click Next.
License Agreement dialog displays.
OPOS Driver Installation Guide
Rev. 1.00
- 8 -
ZQ110
3. Select I accept the terms of the license agreement, and click Next.
Setup Type dialog displays.
4. Select Complete, and click Next.
Choose Installation Destination dialog displays.
The default directory is:
C:\Program Files\OPOS\Zebra ZQ110 OPOS DRIVER\.
OPOS Driver Installation Guide
Rev. 1.00
- 9 -
ZQ110
5. Select the default directory or a unique directory, and click Next.
Ready to Install the Program dialog displays.
6. Click Install to begin the installation. Click Cancel to exit the installation.
Setup Status dialog displays.
OPOS Driver Installation Guide
Rev. 1.00
- 10 -
ZQ110
3-2 Uninstall the OPOS Driver
To remove or modify the OPOS DRIVER,
1. Open the Control Panel.
2. Select ZebraZQ110 OPOS Driver from Add/Remove Programs
3. Select Uninstall or Change.
OPOS Driver Installation Guide
Rev. 1.00
- 11 -
Zebra Technologies International, LLC
475 Half Day Road
Zebra Technologies Europe Limited
Dukes Meadow
Suite 500, Lincolnshire
Millboard Road
Illinois 60069 USA
Bourne End
Phone: +1.847.634.6700
Toll-Free: +1.800.230.9494
Fax: +1.847.913.8766
Buckinghamshire, SL8 5XF, UK
Phone: +44 (0)1628 556000
Fax: +44 (0)1628 556001
|
Weed Eater Trimmer 545117522 User Manual
Weider Home Gym WESY91080 User Manual
Weslo Treadmill WLTL295080 User Manual
Westinghouse Computer Hardware 40_ 120HZ 1080P LED HDTV User Manual
Westinghouse Outdoor Ceiling Fan UL ES I56 WJ WH05 User Manual
Whirlpool Freezer EV090FXK User Manual
Whirlpool Washer 3363834 User Manual
Winegard TV Converter Box RCDT09A User Manual
Woods Equipment Lawn Mower 872500G User Manual
Zenoah Trimmer EXZ2401S User Manual