Woodstock Glue Gun D2483 User Manual

D2483  
Hot Melt Glue Gun – Small  
SHOP FOX® IS  
A REGISTERED  
TRADEMARK  
OF  
Manufactured in  
China for Woodstock  
International, Inc.  
Visit our website @  
woodstockinternational.com  
1-800-840-8420  
FAX: 360-671-3053  
HOW TO USE THE GLUE GUN:  
1: Plug in gun. Load the glue sticks into the back of the gun.  
2: Press trigger several times until the glue stick is firmly set into the inner tube.  
3: Allow the glue gun to warm up for approximately 5 minutes.  
4: Squeeze trigger until glue flows from the nozzle.  
5: Glue need not be spread. Press surfaces together within 15 seconds. Use of clamps or other holding  
devices is not necessary. Clean surfaces for best bonding.  
6: Unplug glue gun when finished. No clean up required. Never pull the glue stick out the back of the gun.  
Use 516" glue sticks only.  
CAUTION: Hot melt glue gets hot! Nozzle area temperature reaches 380°. If accidental contact should occur,  
 
do not try to remove the glue. Put in cold water immediately.  

Well Traveled Living Patio Heater 02109 User Manual
Westinghouse Fan WST6004 User Manual
Westinghouse Flat Panel Television W2602 BK User Manual
Williams Sound Stereo System PPA T36 User Manual
Wolf Ventilation Hood PI363418 User Manual
Woodstock TV Antenna d4327 d4328 User Manual
Xantech Universal Remote 48095D User Manual
Yamaha Guitar BB404 User Manual
Yamaha Musical Instrument CLP 570 User Manual
Zephyr Ventilation Hood ES1 30AW User Manual